Sticker Little dreamer, Art. AC0018
- Product code: AC0018
- Free shipping for orders over 16000 eur. Guaranteed return within 14 days
Stickers will make any room fun, interesting, vibrant and funny.
All products are made of high-quality foil and do not contain harmful substances.
Characteristics of children's stickers
- The products are ready for application on a flat surface - not only on walls, but also on furniture, glass, even on household appliances.
- Advantages:
- ease of application;
- acceptable price;
- The permissible temperature range (from –40 to + 80 °С) allows the use of this decoration even outside the spaces;
- if necessary, the image can be slightly peeled
- For single use only
Draw ATTENTION TO:
- The surface must be free of dust
- Use stickers no earlier than three weeks after painting the surface
- Do not store the stickers for more than three weeks after you received them.
RECOMMENDED:
During installation, as well as within 48 hours, the air temperature in the room must be constant, without drops and drafts.
| Camera type | camera copii |
| Material | self-adhesive film |
| Color | Blue |
| Style/Model | Animals |
| Washability | Washable |
| Thickness/Weight | 180 g/m2 |
Products from the same collection
Recommended products
Other customers have also seen the displayed products
The first and perhaps the most important step in ordering a wallpaper model is measuring the wall. We recommend adding 10 cm to each height for more effectiveness and safety.
For an ordinary wall, the process should be simple and intuitive: measure the length and height of the wall separately and note the respective elevations. Avoid including decorative elements such as plinths, battens, or other such accessories in the measurements. Check the measurements.
With an inclined wall, it is important to start with the longer or wider side, with increased attention to any kind of irregularity or unevenness of the wall. The wallpaper roll has a rectangular shape, which means that during assembly it can be cut or cut according to the respective shape and specifications.
If you have an irregular wall or one that frames elements such as a window, door, or something similar, we recommend measuring the total dimensions of the wall. During installation, all these elements will be cut from the wallpaper roll.
Important! For any measurements, we recommend adding 10 cm to avoid any error or imperfection of the wall!
Carefully prepare the surface on which the wallpaper is to be glued. It must be clean, neat, and non-absorbent. If you want to apply it on a new screed or plasterboard, apply a primer based on an race first. The mounting surface must be white.
The wallpaper strips are cut taking care of the continuity of the model, numbering them on the back with a pencil (no pen is used), then the strip is glued following the vertical or the previously glued strip. Prepare the adhesive according to the type of wallpaper. Mix the contents with water until a homogeneous paste is obtained. Mix vigorously again after 5 minutes. With a stencil or a brush, apply an even layer on the wall, or, as the case may be, on the wallpaper roll. Always follow the instructions for use of the wallpaper manufacturer. Immediately clean the excess adhesive with a damp cloth.
It is pressed with a rubber roller or squeegee, taking care not to leave air bubbles under the wallpaper, after which immediately wipe off the excess adhesive from the joints. Do not rub the joints hard! When it is wet, the wallpaper is more sensitive and can be damaged very easily.
If you have purchased a paintable vinyl wallpaper, allow at least 24 hours to pass between gluing the wallpaper and applying the first layer of paint. The paint must be water-based.
High-quality wallpaper can create a pleasant and welcoming interior. In order to prolong the life of the wallpaper, it must be vacuumed and wiped, if necessary, with a damp cloth, soaked in an ecological solution, without additives.